Office hours:

Mon - Fri    8:00am - 5:00pm MST  Sat   9:00am - 12:00pm MST

Sun   Closed

Copyright © 2019 Pro Maintenance Additives, LLC. All rights reserved.

facebook, pro maintenance additives
ASE We Employ Website Logo.jpg
 

EZYPOR Liquid Measure

Fits any plastic bottle with a 28 millimeter cap thread. (soda bottle) $9.95

For use with our Single Neck 8oz, 16oz, & 32oz bottles. Adds a perfect measuring device to these bottles, and allows safe and easy dispensing! So easy to use! Accurate measuring! No mess dispensing!

  • Child-proof caps!

  • Fully sealed - stays on the bottle till empty!

  • Excess drips go back into the bottle!

  • Measures in 5 milliliter increments up to 20 milliliters!

  • Re-usable - only buy it once for each product!

You only need to purchase EZYPOR once for each product bottle. It simply screws on and replaces the original bottle cap, and it seals it just as the cap original cap would. The caps are child proof cap - both where it screws onto the bottle, and also on its own cap. You simply remove the bottle cap, fit the EZYPOR device, and gently squeeze the

bottle which fills up the clear plastic chamber in 5 milliliter increments up to 20 millilitres, allowing for a precise measure of the additive relative to the volume of fuel or oil you wish to add it to. You remove the EZYPOR cap and a spring loaded spout protrudes a little from the device. Also, a non-return valve operates to prevent the liquid returning to the bottle as you up-end the bottle to dispense the additive. This allows you to only dispense the amount of additive that you've chosen, and no more. A very simple and easy to use device, no leaks, no drips, no dirty hands, no smells. Easy and convenient. Use for both the fuel and oil treatments additives.

SET UP

Measure and cut the pick-up tube to the correct length for the bottle you are attaching the EZYPOR to. It's best to make the tube just marginally (0.5" - 1") longer so that it extends completely to the bottom of the bottle - this ensures you can get the very last drops from the bottle as it empties.

HOW TO USE

Ensure the top cap of the EZYPOR is fitted securely. Remove the existing bottle cap and screw the EZYPOR on the bottle. Make sure it is on tightly - it has a child-proof cap system and will turn freely once it is tightened enough. To test for leaks, ensure the top cap is screwed on, and gently squeeze the bottle. If no air can be heard escaping, it's good to go!

Remove the top child-proof cap. The extension nozzle pops up to enable easy pouring into small openings.

Gently squeeze the bottle. The liquid in the bottle moves up the tube and starts to fill the reservoir. Stop squeezing when the correct level is reached (max of 20 milliters per measure). The reservoir is marked in 5 milliliter increments to a maximum of 20 milliliter on one side, and a 1/2 ounce measure on the other side.

Invert the bottle and pour out the liquid. A valve inside the EZYPOR prevents any more liquid from coming out of the bottle while it is inverted. This ensures an accurate measure.

When you return the bottle to upright, any drips get trapped by the pop-up nozzle as shown. When the cap is replaced, the nozzle pushes down and returns the drip to the reservoir.

Replace the child proof cap, pressing down firmly to start as the spring loaded extension nozzle will resist a little. Now you’re finished - clean hands, no smell, and the right amount! Keep the EZYPOR on the bottle. It is sealed and is designed to stay on the bottle. When your product runs out, you can re-use it for the next one!

Perfect for many other applications - mixing 2-stroke engine oils, herbicides, cleaning agents, household chemicals etc.! Purchase it seperately, or add to shopping cart when buying our other products!

Cut approx .5" - 1" longer than depth of bottle

It is important to not swap your EZYPOR from one product bottle to a different product bottle. The cross contamination from product to product can have an unintended harmful effect on the components the product comes in contact with. We strongly recommend having one EZYPOR for each individual product, and just swapping to the replacement product bottle when needed.

Disclosure: Combining chemicals can be dangerous!  It is NOT RECOMMENDED to use the same EZYPOR for dispensing different chemicals. Chemical resistance is  based on use of common domestic liquids and fuel additives. Although industrial chemicals may be used with EZYPOR,  no guarantee is offered and must be tested prior to use.

Disclaimer - By purchasing the product the buyer agrees that Pro Maintenance Additives LLC or EZYPOR (NZ) Ltd. cannot be held responsible for possible resulting harm to humans or appliances, as neither Pro Maintenance Additives LLC or EZYPOR (NZ) Ltd. have control over the actions of the purchaser or user.